WHAT YOU'LL NEED…A spray bottle, scissors (or sharp blade) and a cloth for wiping any excess water.
We'll pop a felt squeegee in your order for you!

FIRST THINGS FIRST… Make sure your window is sparkling clean.
You don’t want dirt to be trapped underneath and spoil your decal!
Fill your spray bottle with water. 

THE WETTER THE BETTER…Positioning on the window is so much easier when the window is wet. So, apply a mist of water on your window. 

SO, LET'S GET CRACKING… Now for the fun part! Peel the decal from the backing paper and place on your window. You may need two pairs of hands for larger decals.Once you’re happy with the placement, press the felt side of the squeegee across the decal to smooth the water and air bubbles out to the edges of the film.
A fair bit of pressure can be applied so don’t be shy!

TIME FOR A TRIM…Nobody needs excessive film flapping about, getting in the way! 
If you have a lot of overhang at the edges cut off the excess so you're left with only a small amount to fine trim.  
Be careful no to overcut though! 

TACKLING THOSE EDGES…Use the plastic side of the squeegee, press into and slide along the edges creating creases where the film will eventually be cut.

SLICE WITH A KNIFE…So knife or scissors?  We Dizzy Ducks prefer to use a craft knife to trim the edges but you can use scissors too if that's all you have to hand.
Use the plastic edge of the squeegee to hold the blade into the edges of the window.  Move the squeegee and blade together down the edges, slicing the film.

OR SNIP WITH SCISSORS… Peel the film away from the side of the window and use the crease as a guide for cutting.  Steady hand and a good pair of eyes and you're away!  

NEARLY THERE…All there is left to do now is to give the whole thing a wipe down to remove any left-over water.  You can squeegee again too if you think you need to. Now you’re all done you can stand back and admire all your handiwork!

KEEPS ON GIVING…Don't forget our window decals are reusable. 
If you want to switch out different designs simply remove and store on the backing paper it came with and use again and again!

ALWAYS HERE TO HELP…We are a small family business and pride ourselves on great customer service. If you have any questions or need any help please do Get In Touch with us.  We're a friendly bunch!

contact@dizzyduckdesigns.com

What you’ll need…

A spray bottle, washing up liquid, scissors (or sharp blade) and kitchen roll.
We have popped a felt squeegee applicator in your order for you!

First things first…

Make sure your window is sparkling clean. You don’t want dirt to be trapped underneath and ruin your privacy film! Then, fill your spray bottle with water, add a few drops of washing up liquid and give a little shake.

The wetter the better…

Positioning on the window is so much easier if both the window and film are covered in plenty water. So, thoroughly spray your window with water.
Now two pairs of hands comes in really useful here! To stop the film sticking to itself, one person peel the film off the backing paper whilst the other person sprays the sticky side generously with water.

Time for a trim…

Nobody needs excessive film flapping about and getting in the way! If you have a lot of overhang around any edges cut off the excess so you’re left with only small amounts to fine trim. Be careful not to over cut though!

Tackling those edges…

Use the plastic edge of the squeegee and slide it all around sides, pressing into the edges, creating creases where the film will eventually be cut to fit.
If fitting a full window panel you will have gathered folds of film in the corners, but don’t fret! On each corner peel back the film and with scissors cut into the corners being careful not to cut inside the creased areas, less is more! You can always cut in again later if you need to. You won’t have this issue with the border decal.

Slice with a knife…

So, knife or scissors? We Dizzy Ducks prefer to use a craft knife to trim the edges of the film but you can use scissors too if that’s all you have to hand.
Use the plastic edge of the squeegee to hold the blade into the edges of the window. Move the squeegee and blade together down the edges, slicing the film.

Slice with a knife…

Peel the film away from the side of the window and use the crease as a guide for cutting. Steady hand and a good pair of eyes and you’re away! Just watch out for those corners!

Or snip with scissors…

We are a small family business and pride ourselves on great customer service.
So, if you have any questions or need any help please do get in touch with us.

Nearly there…

All there’s left to do now is give the whole thing a wipe down to remove any left-over water and squeegee again if needs be. Now you’re all done you can stand back and admire all your handiwork!

What you’ll need… A spray bottle, washing up liquid, scissors (or sharp blade) and kitchen roll.
We have popped a felt squeegee applicator in your order for you!
First things first… Make sure your window is sparkling clean. You don’t want dirt to be trapped underneath and ruin your privacy film! Then, fill your spray bottle with water, add a few drops of washing up liquid and give a little shake. The wetter the better… Positioning on the window is so much easier if both the window and film are covered in plenty water. So, thoroughly spray your window with water.
Now two pairs of hands comes in really useful here! To stop the film sticking to itself, one person peel the film off the backing paper whilst the other person sprays the sticky side generously with water. So let's get cracking...
Now for the fun part! Place the film on your window levelling it with the bottom edge of your window, centralising the pattern. Creases will permanently mark the film, so carefully does it! Use the felt edge of your squeegee to smooth the water and air bubbles out to the edges of the film.
Time for a trim...
Nobody needs excessive film flapping about and getting in the way!  If you have a lot of overhang around any edges cut off the excess so you’re left with only small amounts to fine trim.  Be careful not to over cut though! Tackling those edges... Use the plastic edge of the squeegee and slide it all around sides, pressing into the edges, creating creases where the film will eventually be cut to fit.
If fitting a full window panel you will have gathered folds of film in the corners, but don’t fret! On each corner peel back the film and with scissors cut into the corners being careful not to cut inside the creased areas, less is more! You can always cut in again later if you need to. You won’t have this issue with the border decal. Slice with a knife… So, knife or scissors? We Dizzy Ducks prefer to use a craft knife to trim the edges of the film but you can use scissors too if that’s all you have to hand.
Use the plastic edge of the squeegee to hold the blade into the edges of the window. Move the squeegee and blade together down the edges, slicing the film. Slice with a knife… So, knife or scissors? We Dizzy Ducks prefer to use a craft knife to trim the edges of the film but you can use scissors too if that’s all you have to hand. Use the plastic edge of the squeegee to hold the blade into the edges of the window. Move the squeegee and blade together down the edges, slicing the film.
Or snip with scissors… Peel the film away from the side of the window and use the crease as a guide for cutting.  Steady hand and a good pair of eyes and you’re away!  Just watch out for those corners!
Nearly there… All there’s left to do now is give the whole thing a wipe down to remove any left-over water and squeegee again if needs be. Now you’re all done you can stand back and admire all your handiwork!

WHAT YOU'LL NEED Water, a spray bottle, bank card and a cloth for wiping any excess water.
FIRST THINGS FIRST… Make sure your window is sparkling clean. You don’t want dirt to be trapped underneath and spoil your decal! Fill your spray bottle with water. The wetter the better… Positioning on the window is so much easier when the window is wet. So, apply a light mist of water on your window. You may need two pairs of hands if your decal is large or has any fiddly cuts that might more easily rip if handled roughly. So carefully does it! SO, LET'S GET CRACKING... Now for the fun part! Peel the decal from the backing paper and place on your window.
Once you’re happy with the placement, use the bank card and squeegee across the decal to smooth the water and air bubbles out to the edges of the film.
A fair bit of pressure can be applied so don’t be shy!
NEARLY THERE... All there is left to do now is to give the whole thing a wipe down to remove any left-over water.
You can squeegee again too if you think you need to.
Now you’re all done you can stand back and admire all your handiwork!
keeps on giving… Don’t forget you can peel your decal off the window and use again time after time.
Just store dry on the backing paper it came with.
SHARING IS CARING… We would love to see our decals up in your lovely home, and so would our customers too!
If you are on Instagram or Facebook please share your pics and tag us in! ALWAYS HERE TO HELP…We are a small family business and pride ourselves on great customer service.
So, if you have any questions or need any help please do get in touch with us.
contact@dizzyduckdesigns.com